Carbon Slip On Flange

Carbon slip on flange refers to a kind of flange connected with the vessel or pipeline by fillet weld. It is an arbitrary flange. During the design, according to the integrity of the connection between the flange ring and the straight cylinder section, it shall be checked according to the integral or loose flange. There are two kinds of flange rings with neck and without neck. Compared with the neck butt welding flange, the flat welding flange has the advantages of simple structure and low material consumption, but its stiffness and tightness are not as good as the neck butt welding flange. Flat welding flanges are widely used in the connection of medium and low pressure vessels and pipelines

Stainless Steel Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter. Carbon Steel SORF Flange stands for slip on raised face flange. The basic aim of an SORF Flanges is used to flow metering of pipe systems. It is used for all intensive purposes, similar to weld neck and slip-on flanges with extra machining. Reducing Slip On Flange have a lower material cost than weld neck flange and are more easily aligned.

Flange Ansi 150 Slip On is extremely common in lower pressure applications. Most slip on style flanges has a hub which frequently appears similar dimensionally to a raised face. It can be fit out without a hub if space is restricted and the application permits for a slip on “ring style”. While the hub style is more common while referring to a ring style slip on without a hub still falls under the group of a slip on flange, and can be known out as you desire. Slip ons in higher pressure classes are frequently made with the height of a lap joint for a better connection. Sometimes the buyer will go for a slip on made to a lap joint style with a machined hub, if the hub height is not a concern and a lap joint is not easily available. Slip On Flange Rf is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint. Diameter and height are in ASME B16.5 defined, by pressure class and diameter. The height of the raised face is determines by the pressure rating of the flange. Slip On Flange Pn16 OD is also welded on the back side of the flange.

http://www.sy-export.com/